Automated BGP Configuration
Pureport's Multicloud Router simplifies network configuration and deployment by assigning WAN network subnets, discovering autonomous system numbers, and automatically configuring BGP sessions on the administrator’s behalf.
Layer 3 Networking
All Pureport gateways support BGP Peering to allow for the dynamic exchange of routes with edge routers, as well as between other gateways across the customer’s private network. Cloud connections support automatic failover between redundant gateways, and allows all edge routers to dynamically learn the routes to all interconnected subnets.
IP Address Conflict Resolution
Multicloud, hybrid cloud and multi-site networks are often configured with overlapping IP address ranges. Using Pureport’s Cloud Grade NAT™ functionality, the Multicloud Router intelligently detects and suggests IP address translation to enable the interconnection of networks with overlapping IP addresses. By mitigating IP address conflicts, organizations avoid the significant expense, and immediately proceed with the interconnection of networks.
Pureport’s Multicloud Fabric powers full-mesh, private backbone networks. Built for high availability and outstanding performance, a network allows each connected endpoint (e.g., cloud environment, customer site, etc.) to communicate directly through the Multicloud Router, without any network hairpins.
All of Pureport’s networks are created as highly-available connections. Each connection has two gateway containers across separate availability zones. Traffic will continue to flow, even if a failure occurs—such as a power outage, provider circuit loss, switch failure, engine failure, etc.– in one of the two zones.